ICE Rental Catalog

ICE ® M odel HB- 55 H ydraulic R otary H ead with ICE ® 350G OR 350T P ower U nits

Two torque-speed combinations – to 60 rpm or 56,100 ft-lbs (76 000 Nm) Choice of high speed or high torque for maximum drilling production and profitability Simple single-motor and open-frame design for maximum reliability and easy service and maintenance Choice of two power units for maximum performance, most economical operation and to meet any EPA/EU emission regulations

Performance

HB55 with 350G/350T

HB55 Maximum**

High-torque Setting Torque High-speed Setting Torque Speed*

56,100 ft-lbs

76 000 Nm 66,500 ft-lbs 90 200 Nm

30 rpm

90 rpm

28,100 ft-lbs

38 000 Nm 33,250 ft-lbs 45 100 Nm

Speed* 90 rpm * Speeds are shown for free-hanging (no-load) units. Speed under actual drilling conditions may be 10% to 15% lower. ** Maximum torque requires a power unit capable of 6,500 psi (450 bar). ** Maximum speed requires a power unit capable of 137 gpm (520 lpm). ** Max speed & Max torque at the same time exceeds HP limit. HP limit - 315HP / 235kW Capabilities, Weights & Dimensions Crowd Force 132,600 lbs 590 kN Extraction Force 132,600 lbs 590 kN Optional Shaft ID 3 in 75 mm Optional Swivel Joint ID 3 in 75 mm Weight with Guide & Swivel 3,660 lbs 1660 kg Weight of 100’ (30m) Hoses 1,090 lbs 495 kg Height (H) 68 in 1715 mm Width for Leads 26 in 660 mm Depth (CF + CR) 57 in 1425 mm Center to Front (CF) 37 in 920 mm Center to Rear (CR) 20 in 505 mm Power Unit Specifications CF 60 rpm

CR

H

Model 350G

Model 350T

Engine Power

CAT C9 EPA Flex CAT C9 T4 Stage IV 350 HP 250 kW 350 HP 250 kW 97 gpm 370 lpm 97 gpm 370 lpm 11,300 lbs 5150 kg 15,500 lbs 7030 kg 130 in 3300 mm 151 in 3835 mm 87 in 2200 mm 95 in 2415 mm 63 in 1600 mm 72 in 1830 mm 5,500 psi 380 bar 5,500 psi 380 bar

Flow (zero load) Max Pressure

Weight Length Height Width

Angle or optional roller guides for 26” (660 mm) leads. Optional leads side-mount and H-Beam guides available. Available Hex or API auger flighting connectors. Hollow output shaft. Available swivel for injecting air, water or grout. High crowd and extraction forces to maximize drilling production. Remote-control pendant with emergency stop & engine speed control for fuel efficiency. Maximum efficiency and reliability ensured by our open-loop hydraulic system. Highest quality, reliable piston pumps and motor. ICE power units may be used for other ICE equipment including vibratory and hydraulic impact hammers.

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

Constant improvement and engineering progress make it necessary that ICE ® , Inc reserve the right to make speci- fication changes without notice. Please consult ICE ® for the latest available information.