ICE Rental Catalog

ICE ® M odel HS- 50 H ydraulic R otary H ead with ICE ® 350G / 350T P ower U nits

Two torque-speed combinations allow choice of high speed or high torque for maximum drilling production and profitability. Simple single-motor and open-frame design for maximum reliability and ease of service and maintenance. 350HP (250 kW) CAT C9 Flex or Tier 4 engine for maximum performance, most economical operation and to meet any EPA/EU emission regulations.

Performance

HS50 with 350G / 350T

HS50 Maximum**

High-torque Setting Torque High-speed Setting Torque Speed*

45,000 ft-lbs

61 000 Nm 52,650 ft-lbs 71 400 Nm

35 rpm

40 rpm

22,500 ft-lbs

30 500 Nm 26,325 ft-lbs 35 700 Nm

Speed* 75 rpm * Speeds are shown for free-hanging (no-load) units. Speed under actual drilling conditions may be 10% to 15% lower. 70 rpm

** Maximum torque requires a power unit capable of 6,500 psi (450 bar). ** Maximum speed requires a power unit capable of 106 gpm (395 lpm). ** Recommended maximum power for the HS50 is 350 HP (250 kW). Capabilities, Weights & Dimensions Crowd Force 80,000 lbs

355 kN 355 kN 75 mm 75 mm 1385 kg 455 kg 1755 mm 660 mm 1356 mm 800 mm 556 mm

Extraction Force Optional Shaft ID Optional Swivel ID

80,000 lbs

3 in 3 in

Weight with Guide & Swivel Weight of 100’ (30m) Hoses

3,050 lbs 1000 lbs

Height (H)

69 in 26 in 54 in 32 in 22 in

Width with Leads Depth (CF + CR) Center to Front (CF) Center to Rear (CR)

Power Unit Specifications

Model 350G

Model 350T

Engine Power

CAT C9 EPA Flex CAT C9 T4 Stage IV 350 HP 250 kW 350 HP 250 kW 97 gpm 370 lpm 97 gpm 370 lpm

Flow (no load)

Max Pressure 5,500 psi

380 bar 5,500 psi 5150 kg 15,500 lbs

380 bar

Weight Length Height Width

11,300 lbs

7030 kg

130 in 3300 mm 151 in 3835 mm 87 in 2200 mm 95 in 2415 mm 63 in 1600 mm 72 in 1830 mm

Angle or optional roller guides for 26” (660 mm) leads. Optional leads side-mount and H-Beam guides available. Available Hex or API auger flighting connectors. Available swivel for injecting air, water or grout. High crowd and extraction forces to maximize drilling production. Remote-control pendant with emergency stop engine speed control for fuel efficiency.

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

Constant improvement and engineering progress make it necessary that ICE ® , Inc reserve the right to make speci- fication changes without notice. Please consult ICE ® for the latest available information.