ICE Rental Catalog

4. Operate all machines with safety in mind. Stand clear of machines in use, and make sure protective guards are in place.

5. Do not change tools when auger, wall cutter, bucket, casing or core barrel is moving or still engaged.

6. Allow machine to cool and always wear protective gloves to inspect or touch conicals.

7. Inspect tools daily. Do not use dull, cracked, burred, or bent tools.

IMPORTANT Many injuries occur during tool change-out in construction and surface mining sites. Kennametal recommends the installer be equipped with the appropriate Personal Protective Equipment (PPE) for each task. Using Kennametal tools to install conicals is recommended. If proper tools are not used, the clip retaining strength could be weakened and could result in lost tool and machine productivity. Kennametal has no control over the end use of its products or the environment into which those products are placed. Kennametal urges its customers to adhere to the recommended standards of use of their machines and tools and that they follow procedures that ensure safe operations. The information included in this catalogue and other recommendations on machining practices referred to herein are only advisory in nature and do not constitute representations or warranties and are not necessarily appropriate for any particular work environment or application. Kennametal Inc. encourages the safe use of its products.

kennametal.com

7