ICE Rental Catalog
CH 6
CH 650
Technical Data
Main winch Type
Controlled descent
-
1 st layer line pull 1 st layer rope speed
250 56,200
kN lbs
76 249 28 1” 1/8
m/min ft/min
Rope diameter
mm ft-in
Rope layers
2
-
Useful rope length with 1 / 2 / .. full layers
38 - 84 124’ 8” - 275’ 7”
m ft-in
FEM classification Service winch Type 1 st layer line pull 1 st layer rope speed
M5 - L2 - T5
-
Controlled descent / Free fall
-
133 29,900
kN lbs
64 210’ 20 13/16”
m/min ft/min
Rope diameter
mm ft-in
Rope layers
3
-
Useful rope length with 1 / 2 / 3 full layers
17 - 39 - 62 56’ - 128’ - 203’
m ft-in
M5 - L2 - T5
FEM classification
-
Bored Piles (BP) Drilling radius min - max
3.800 - 4.500 12’ 5” 1/2 - 14’ 9” 1/4
mm ft-in
Max pile diameter, CPD (Cylinder pull down) Max pile diameter, WPD (Winch pull down) Max pile depth friction kelly CPD - WPD Max pile depth locking kelly CPD - WPD
2.200 - 2.500 ( 2 ) 7’ 3” - 8’ 2” ( 2 ) 2.000 - 2.500 ( 3 ) 6’ 7” - 8’ 2” ( 3 )
mm ft-in
mm ft-in
69 226’ 5” 56,5 185’ 4”
m ft-in
m ft-in
Operating weight w/o tool, CPD Operating weight w/o tool, WPD CFA (Continuous Flight Auger)
62.000 136,700 64.000 141,100
kg lbs
kg lbs
T4
Max pile diameter Max length of augers
1.200 3’ 9”
mm ft-in
18,5 60’ 8”
m ft-in
Max length of auger extension
6 19’ 8”
m ft-in
Max pile depth Extraction force
18 + 6 = 24 59’ 1” + 19’ 8” = 78’ 9”
m ft-in
650 146,000
kN lbs
100 ( 4 ) 22,500 ( 4 )
Crowd force on auger (option)
kN lbs
Note ( 1 ) 406 mm (16” ) Kelly bar, locking type ( 2 ) tool in front of mast - below mast ( 3 ) with - without bottom mast element ( 4 ) depth reduced by 1 m (3’ 3” ½)
3
Made with FlippingBook Annual report