International Markets

First page Table of contents 1 Next page Last page

ICE ® est1974 providing Unyielding Client Support Technical Expertise World Access to Sales, Service and Fleet

O ne -S top F oundation P ile D riving & D rilling S upplier

ICE ® Model 216D Vibratory Driver/Extractor Powered By Model 150G Power Unit

Lighter weight for increased reach or use with smaller cranes Reduced height for better access in low-overhead situations Up to 50 tons (445 kN) line pull for extraction

ICE Model 216D Vibratory Pile Hammer Eccentric moment

12.6 kg-m

Maximum frequency

1700 vpm

Driving Force

420kN 400kN

Centrifugal force

Amplitude (free w/o clamp)

25 mm

Standard line pull for extracting Maximum line pull for extracting

445 kN 445 kN

Weight (no clamp or hoses) Non-vibrating Weight Height without clamp (H)

1655kg

635 kg

1565 mm 1615 mm 395 mm 305 mm

Length (L) Width (W)

Throat width (TW)

Hydraulic hose length Hydraulic hose weight

30 m

385 kg

ICE Model 150G Power Unit Engine Weight w beam, caisson clamps & 1/2 hoses Height w sheeting clamp (HH) Weight w sheeting clamp & 1/2 hoses Height w beam & caisson clamps

2290 mm

2370 kg

2295 mm

3215 kg

Caterpillar C4.4

Emissions rating

EU Flex

216D

Power

106 kW

Operating speed

2000 rpm 175 bar 300 lpm 165 bar 2950 kg 2590 mm 1270 mm 1915 mm 25 lpm

Maximum motors pressure Motors flow (no load)

Clamp pressure

Clamp flow

Weight (w/ full fluid & 1/2 fuel)

Length Width Height

Hydraulic oil capacity

700 liters 280 liters

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

Constant improvement and engineering progress make it necessary that ICE ® , Inc reserve the right to make speci- fication changes without notice. Please consult ICE ® for the latest available information.

ICE ® Model 216D Vibratory Driver/Extractor Powered By Model 150G Power Unit

ICE Model 95 Sheeting Clamp Clamping Force 110 tons 985 kN Weight 1150 lbs 522 kg

0.46

ICE 3’ Beam and Two Model 105H Caisson Clamp Clamping Force 220 tons 1960 kN Weight 3320 lbs 1510 kg

ICE Model 40 Wood Concrete and Pipe Clamp Clamping Force 40 tons 355 kN Weight 3220 lbs 1460 kg

Model 216D Accessories Bias weights Vibrator stand

ICE Model 25B Wood Concrete and Pipe Clamp Clamping Force 25 tons 222 kN Weight 2000 lbs 900 kg

UV14C_230G_Jan2013

ICE ® Model 16D Vibratory Driver/Extractor Powered By Model 230G Power Unit

Design combines high eccentric moment (16 kg-m) and suspended weight with clamp of 2500 kg Lighter weight for increased reach or use with smaller cranes Reduced height for better access in low-overhead situations Up to 430 kN line pull for extraction

ICE Model 16D Vibratory Pile Hammer Eccentric moment

16 kg-m

Maximum frequency

1900 vpm

Driving Force

660kN 640kN

Centrifugal force

Amplitude (free w/o clamp) 28 mm Standard line pull for extracting 430 kN Maximum line pull for extracting 430 kN Weight (no clamp or hoses) 1785kg Non-vibrating Weight 635 kg Height without clamp (H) 1565 mm Length (L) 1640 mm Width (W) 460 mm Throat width (TW) 337 mm Hydraulic hose length 30 m Hydraulic hose weight 385 kg Height with sheeting clamp (HH) 2285 mm Weight with sheeting clamp & 1/2 hoses 2500 kg Height with beam & caisson clamps 2290 mm Weight with beam, caisson clamps & 1/2 hoses 3345 kg

ICE Model 230G Power Unit Engine

Caterpillar C6.6

Emissions rating

EU Flex

Power

168 kW

Operating speed

2100 rpm 310 bar 295 lpm 310 bar 4225 kg 2800 mm 1475 mm 1960 mm 25 lpm

Maximum motors pressure Motors flow (no load)

Clamp pressure

Clamp flow

Weight (w/ full fluid & 1/2 fuel)

Length Width Height

Hydraulic oil capacity

1040 liters 460 liters

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 16D Vibratory Driver/Extractor Powered By Model 230G Power Unit

ICE Model 95 Sheeting Clamp Clamping Force

110 tons

985 kN

Weight

1150 lbs

522 kg

0.46

ICE 3’ Beam and Two Model 105H Caisson Clamps Clamping Force 220 tons 1960 kN Weight 3,320 lbs 1510 kg

Model 16D Accessories Bias weights Vibrator stand

ICE Model 25B Wood Concrete and Pipe Clamp Clamping Force 25 tons 222 kN Weight 2000 lbs 900 kg

ICE Model 40 Wood Concrete and Pipe Clamp Clamping Force 40 tons 355 kN Weight 3220 lbs 1460 kg

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

UV14C_230G_Jan2013

ICE® Model 416L Hydraulic Vibratory Driver/Extractor Powered By Model 350G Power Unit

The most popular vibratory hammer for international clients since 1974. Narrow throat width for U-shaped sheet piles. Up to 40 tons (356 kN) line pull for extraction.

ICE Model 416L Vibratory Pile Hammer Eccentric moment

25 kg-m

Maximum frequency

1700 vpm

Driving Force

886 kN 790 kN

Centrifugal force

Amplitude (free w/o clamp) Standard line pull for extracting Maximum line pull for extracting Weight (no clamp or hoses)

23 mm

355 kN 355 kN

3560 kg 1390 kg

Non-vibrating Weight Height without clamp (H)

1780 mm 2415 mm 435 mm 356 mm

Length (L) Width (W)

Throat width (TW) Hydraulic hose length Hydraulic hose weight

30 m

650 kg

Height with sheeting clamp (HH) Weight with sheeting clamp & 1/2 hoses Height with beam & caisson clamps Weight with beam, caisson clamps & 1/2 hoses

2740 mm

4880 kg

2440 mm

5845 kg

ICE Model 350G Power Unit Engine

Caterpillar C9

Emissions rating

EU FLEX

Power

261 kW

Operating speed

1850 rpm 380 bar 365 lpm 310 bar 20 lpm 3300 mm 1600 mm 2200 mm 1040 liters 445 liters 5150 kg

416L

Maximum motors pressure

Motors flow (no load)

Clamp pressure

Clamp flow

Weight (w/ full fluid & 1/2 fuel)

Length Width Height

Hydraulic oil capacity

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE® Model 416L Hydraulic Vibratory Driver/Extractor Powered By Model 350G Power Unit

350 HP (261 kW) CAT C9 meets current EPA Flexibility engine emis- sion regulations Up to 3,750 lbs (1701 kg) of optional bias weights increase pile penetra- tion rates in difficult soils. Full range of clamps available for sheet piling H-Beams, pipe & caissons and timber & concrete piles. Computer controls on power unit reduce fuel consumption, pinpoint re- pair needs, while providing diagnostics and logs. Maximum efficiency and reliability ensured by our open-loop hydraulic system and application proven piston pumps and motors. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Adaptable for underwater, low headroom or box leads operation. Environmentally friendly non-toxic, biodegradable hydraulic oil.

Clamps & Accessories ICE Model 140C Sheeting Clamp Clamping Force 140 tons

ICE Model 40 Wood Concrete and Pipe Clamp Clamping Force 40 tons 355 kN Weight 3220 lbs 1460 kg

1245 kN

Weight

2200 lbs

1000 kg

ICE 6.5’ HD Caisson Beam & 2 Model 105H Clamps Clamping Force 220 tons 175 kN Weight 4320 lbs 1960 kg

ICE Model 25B Wood Concrete and Pipe Clamp Clamping Force 25 tons 222 kN Weight 2000 lbs 900 kg ICE Model 75 Wood Concrete and Pipe Clamp Clamping Force 75 tons 670 kN Weight 66550 lbs 2970 kg

Model 416L Accessories 12’ Caisson beam 10’ Clamp extension 90 O Turning plate Bias weights Sled for 26” leads Low-headroom suppressor Vibrator stand Wireless remote

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

UV-416L-Jan-2013

ICE ® Model 32D Hydraulic Vibratory Driver/Extractor Powered By Model 350G Power Unit

Design combines high eccentric moment and suspended weight with clamp under 10,500 lbs. Lighter weight for increased reach or use with smaller cranes. Reduced height for better access in low-overhead situations. Up to 100 tons (900 kN) line pull for extraction.

ICE Model 32D Vibratory Pile Hammer Eccentric moment

2,800 in-lbs 32 kg-m

Maximum frequency

1700 vpm

Driving Force

120 tons 1055 kN 115 tons 1020 kN

Centrifugal force

Amplitude (free w/o clamp) Standard line pull for extracting Maximum line pull for extracting Weight (no clamp or hoses)

1.2 in

29 mm

100 tons 900 kN 100 tons 900 kN

7,480 lbs 2,620 lbs

3395 kg 1190 kg

Non-vibrating Weight Height without clamp (H)

82 in 2075 mm 77 in 1940 mm 21 in 530 mm 14.25 in 362 mm

Length (L) Width (W)

Throat width (TW) Hydraulic hose length Hydraulic hose weight

150 ft

45 m

1,425 lbs

645 kg

Height with sheeting clamp (HH) Weight with sheeting clamp & 1/2 hoses Height with beam & caisson clamps

120 in 3040 mm

10,390 lbs

4715 kg

113 in 2855 mm

Weight with beam, caisson clamps & 1/2 hoses 12,800 lbs

5810 kg

ICE Model 350G Power Unit Engine

Caterpillar C9

Emissions rating

EPA Flex EU Flex 350 HP 261 kW 1850 rpm 1850 rpm

Power

Operating speed

Maximum motors pressure

5500 psi

380 bar

Motors flow (no load)

95 gpm 365 lpm

Clamp pressure

4500 psi

310 bar

Clamp flow

6 gpm 20 lpm

Weight (w/ full fluid & 1/2 fuel)

11,350 lbs 5150 kg 130 in 3300 mm 63 in 1600 mm 87 in 2200 mm

Length Width Height

Hydraulic oil capacity

275 gal 118 gal

1040 liters 445 liters

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 32D Hydraulic Vibratory Driver/Extractor Powered By Model 350G Power Unit

Patented Dual-pull™ suppressor provides maximum vibration isolation during driving and light extraction combined with high pull capability for tough extraction jobs. 350HP (261 kW) CAT C9 Tier 3 (Stage IIIA) engine meets current EPA/EU Flex engine emis- sion regulations. Optional 2,970 lbs (1345 kg) bias weights increases pile penetration rates in difficult soils. Environmentally friendly non-toxic, biodegradable hydraulic oil. Maximum efficiency and reliability are provided by our open-loop hydraulic system. Highest quality reliable piston pumps and motor. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Full range of clamps available for sheet piling, H-Beams, pipe & caissons in addition to timber & concrete piles. Adaptable for underwater, low headroom or box leads operation.

Clamps & Accessories

ICE Model 140C Sheeting Clamp Clamping Force 140 tons

ICE Model 40 Wood Concrete and Pipe Clamp Clamping Force 40 tons 355 kN Weight 3220 lbs 1460 kg

1245 kN

Weight

2200 lbs

1000 kg

ICE 6.5’ HD Beam and Two Model 105H Clamps Clamping Force 220 tons 1975 kN Weight 4320 lbs 1960 kg

ICE Model 75 Wood Concrete and Pipe Clamp Clamping Force 75 tons 670 kN Weight 65500 lbs 2970 kg

Model 32D Accessories 10’ Clamp extension 90 O Turning plate Bias weights Vibrator stand Wireless remote

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 52B Vibratory Driver/Extractor Powered By Model 595G/H Power Units

Highest frequency (1800 vpm) and driving force (207 tons, 1845 kN) in its class. 595HP (444 kW) CAT C15 meets current EPA/EU Flexibility emission regulations. Up to 100 tons (900 kN) line pull for extraction.

ICE Model 52B Vibratory Pile Hammer Eccentric moment

51 kg-m

Maximum frequency

1800 vpm 1845 kN 1790 kN

Driving Force

Centrifugal force

Amplitude (free w/o clamp) Standard line pull for extracting Maximum line pull for extracting Weight (no clamp or hoses)

28 mm

600 kN 900 kN

5555 kg 2070 kg

Non-vibrating Weight Height without clamp (H)

2135 mm 2485 mm 530 mm 362 mm

Length (L) Width (W)

Throat width (TW) Hydraulic hose length Hydraulic hose weight

45 m

705 kg

Height with sheeting clamp (HH) Weight with sheeting clamp & 1/2 hoses Height with beam & caisson clamps Weight with beam, caisson clamps & 1/2 hoses

3095 mm

6910 kg

2915 mm

7870 kg

ICE Model 595G Power Unit Engine

ICE Model 595H Power Unit Engine

Caterpillar C15

Emissions rating

EU Flex 444 kW 1800 rpm 380 bar 610 lpm 310 bar 20 lpm 4040 mm 1855 mm 2540 mm 1630 liters 570 liters 7420 kg

Emissions rating

EU Flex 444 kW 1800 rpm 380 bar 610 lpm 310 bar 20 lpm 4040 mm 1855 mm 2540 mm 1630 liters 570 liters 7420 kg

Power

Operating speed

Maximum motors pressure

Motors flow (no load)

Clamp pressure

Clamp flow

Weight (w/ full fluid & 1/2 fuel)

Length Width Height

Hydraulic oil capacity

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 52B Vibratory Driver/Extractor Powered By Model 595G/H Power Units

Optional bias weights up to 5500 lbs (2495 kg) to increase pile penetration rates in difficult soils. Maximum efficiency and reliability are provided by our open-loop hydraulic system and application proven piston pumps and motors. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Full range of clamps available for sheet piling, H-Beams, pipe & caissons and timber & concrete piles.

Adaptable for underwater, low headroom or box leads operation. Heavy steel enclosure and fuel-tank subbase protect power unit. Environmentally friendly non-toxic, biodegradable hydraulic oil.

Clamps & Accessories

ICE Model 75 Wood Concrete and Pipe Clamp Clamping Force 75 tons 670 kN Weight 6550 lbs 2970 kg

ICE Model 140C Sheeting Clamp Clamping Force 140 tons

1245 kN

Weight

2200 lbs

1000 kg

ICE 6.5’ HD Beam and Two Model 105H Clamps Clamping Force 220 tons 1975 kN Weight 4320 lbs 1960 kg

Model 52B Accessories 12’ Caisson beam with 2 105H clamps 15’ Caisson beam with 2 105H clamps 10’ Clamp extension 90 O Turning plate

Bias weights 26” leads sled Low-headroom suppressor Vibrator stand Wireless remote

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 58B Vibratory Driver/Extractor Powered By Model 595H * 595J * 580 Power Unit

Combines high frequency and large eccentric moment (57 kg-m) 444 kW CAT C15 meets current EPA/EU Flexibility emission regulations Up to 900 kN line pull for extraction ICE Model 58B Vibratory Pile Hammer Eccentric moment 57 kg-m Maximum frequency 1600 vpm Driving Force 1670 kN Centrifugal force 1620 kN Amplitude (free w/o clamp) 32 mm Standard line pull for extracting 600 kN Maximum line pull for extracting 900 kN Weight (no clamp or hoses) 5695 kg Non-vibrating Weight 2070 kg Height without clamp (H) 2135 mm Length (L) 2485 mm Width (W) 530 mm Throat width (TW) 362 mm Hydraulic hose length 45 m Hydraulic hose weight 705 kg Height with sheeting clamp (HH) 3095 mm Weight with sheeting clamp & 1/2 hoses 7045 kg Height with beam & caisson clamps 2915 mm Weight with beam, caisson clamps & 1/2 hoses 8005 kg TW

H H

ICE Model 580 Power Unit Engine

ICE Model 595H Power Unit Engine

ICE Model 595J Power Unit Engine

Caterpillar C13B

Caterpillar C15

Emissions rating

EU Stage V

Emissions rating

EU Flex 444 kW 1800 rpm 380 bar 610 lpm 310 bar 20 lpm 4040 mm 1855 mm 2540 mm 1630 liters 570 liters 7420 kg

Emissions rating

EU Flex 444 kW 1800 rpm 380 bar 610 lpm 310 bar 20 lpm 4575 mm 2035 mm 2440 mm 1665 liters 570 liters 9525 kg

Power

430 kW

Power

Operating speed

1800 rpm 380 bar 590 lpm 310 bar 20 lpm 4575 mm 2035 mm 2540 mm 2080 liters 680 liters 9120 kg

Operating speed

Maximum motors pressure

Motors flow (no load)

Clamp pressure

Clamp flow

Weight (w/ full fluid & 1/2 fuel)

Length Width Height

Hydraulic oil capacity

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 58B Vibratory Driver/Extractor Powered By Model 595H * 595J * 580 Power Unit

Optional bias weights up to 5500 lbs (2494 kg) to increase pile penetration rates in difficult soils. Maximum efficiency and reliability are provided by our open-loop hydraulic system and application proven piston pumps and motors. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Full range of clamps available for sheet piling, H-Beams, pipe & caissons and timber & concrete piles.

Adaptable for underwater, low headroom or box leads operation. Heavy steel enclosure and fuel-tank subbase protect power unit. Environmentally friendly non-toxic, biodegradable hydraulic oil.

Clamps & Accessories

ICE Model 75 Wood Concrete and Pipe Clamp Clamping Force 75 tons 670 kN Weight 6550 lbs 2970 kg

ICE Model 140C Sheeting Clamp Clamping Force 140 tons

1245 kN

Weight

2200 lbs

1000 kg

ICE 6.5’ HD Beam and Two Model 105H Clamps Clamping Force 220 tons 1975 kN Weight 4320 lbs 1960 kg

Model 58B Accessories 12’ Caisson beam with 2 105H clamps 15’ Caisson beam with 2 105H clamps 10’ Clamp extension 90 O Turning plate

Bias weights 26” leads sled Low-headroom suppressor Vibrator stand Wireless remote

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 78C Vibratory Driver/Extractor Powered By Model 800H * 800T Power Unit

Highest frequency (1600 vpm) and driving force (245 tons, 2200 kN) in its class 800 HP (597 kW) CAT C18 meets current EPA/EU Flexibility engine emission regulations Up to 125 tons (1125 kN) line pull for extraction

ICE Model 78C Vibratory Pile Hammer Eccentric moment

76 kg-m

Maximum frequency

1600 vpm

Driving Force

2200 kN 2135 kN

Centrifugal force

Amplitude (free w/o clamp) Standard line pull for extracting Maximum line pull for extracting Weight (no clamp or hoses)

31 mm

850 kN 1125 kN 6920 kg 2070 kg 2550 mm 2485 mm 530 mm 362 mm

Non-vibrating Weight Height without clamp (H)

Length (L) Width (W)

Throat width (TW) Hydraulic hose length Hydraulic hose weight

45 m

1090 kg

Height with sheeting clamp (HH) Weight with sheeting clamp & 1/2 hoses Height with beam & caisson clamps Weight with beam, caisson clamps & 1/2 hoses

3515 mm

8735 kg

3660 mm

9505 kg

UNIVERSALHEAD

SERIALNUMBER

MATTHEWS,NORTHCAROLINA MADE INUSA.

ICE Model 800T Power Unit Engine

ICE Model 800H Power Unit Engine

Caterpillar C18

Emissions rating

EU Stage V

Emissions rating

EU Flex 597 kW 1800 rpm 360 bar 870 lpm 310 bar 20 lpm 5490 mm 2085 mm 2630 mm 2080 liters 700 liters

Power

597 kW

Power

Operating speed

1800 rpm 360 bar 870 lpm 310 bar 20 lpm 6350 mm 2085 mm 2645 mm 2080 liters 815 liters

Operating speed

Maximum motors pressure

Motors flow (no load)

Clamp pressure

Clamp flow

Weight (w/ full fluid & 1/2 fuel)

12065 kg

Weight (w/ full fluid & 1/2 fuel)

10200 kg

Length Width Height

Hydraulic oil capacity

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 78C Vibratory Driver/Extractor Powered By Model 800H * 800T Power Unit

Patented Dual-pull TM suppressor provides maximum vibration isolation during driving and light extraction combined with high pull capability for tough extraction jobs. Optional 5,500 lbs (2495 kg) of bias weight increases pile penetration rates in difficult soils. Maximum efficiency and reliability ensured by our open-loop hydraulic system. Highest quality, reliable piston pumps and motors. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Environmentally friendly non-toxic, biodegradable hydraulic oil. Full range of clamps available for sheet piling, H-Beams, pipe & caissons and timber & concrete piles. Adaptable for underwater, low headroom or box leads operation.

Clamps & Accessories

ICE Model 196C Sheeting Clamp Clamping Force 196 tons

ICE Model 240 Sheeting Clamp Clamping Force

1744 kN 1315 kg

240 tons

2135 kN 1770 kg

Weight

2900 lbs

Weight

3900 lbs

ICE 6’ HD Beam & 2 Model 145H Clamps Clamping Force 220 tons

ICE Model 75 Wood Concrete and Pipe Clamp Clamping Force 75 tons 670 kN Weight 6550 lbs 2970 kg

1960 kN 1960 kg

Weight

4,320 lbs

ICE 10’ Beam & 2 Model 145H Clamps Clamping Force 284 tons

ICE Model 165 Wood Concrete and Pipe Clamp Clamping Force 165 tons 1470 kN Weight 12,710 lbs 5765 kg

2520 kN 4760 kg

Weight

10,500 lbs

ICE 12’ Beam & 2 Model 145H Clamps Clamping Force 220 tons

1960 kN 3700 kg

Model 78 Accessories 10’ Clamp Extension Wireless Remote 90 O Turning plate Bias Weights Vibrator Stand Sled for 32” Leads

Weight

8150 lbs

ICE 15’ Beam & 2 Model 145H Clamps Clamping Force 284 tons

2520 kN 9360 kg

Weight

20,640 lbs

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 92C Vibratory Driver/Extractor Powered By Model 800H * 800T Power Unit

Design provides large eccentric moment (94 kg-m) for the toughest driving and extracting jobs. 597kW CAT C18 meets current EPA/EU Flexibility engine emission regulations Up to 95 tons (845 kN) line pull for extraction.

ICE Model 92C Vibratory Pile Hammer Eccentric moment

95 kg-m

Maximum frequency

1685vpm

Driving Force

3020 kN 2950 kN

Centrifugal force

Amplitude (free w/o clamp) Standard line pull for extracting Optional line pull for extracting Weight (no clamp or hoses)

37 mm

850 kN 1125 kN 7240 kg 2070 kg 2550 mm 2485 mm 530 mm 362 mm

Non-vibrating Weight Height without clamp (H)

Length (L) Width (W)

Throat width (TW) Hydraulic hose length Hydraulic hose weight

45 m

1090 kg

Height with sheeting clamp (HH) Weight with sheeting clamp & 1/2 hoses Height with beam & caisson clamps Weight with beam, caisson clamps & 1/2 hoses

3720 mm

10440 kg

3880 mm

12645 kg

ICE Model 800T Power Unit Engine

ICE Model 800H Power Unit Engine

Caterpillar C18

Emissions rating

EU Stage V

Emissions rating

EU Flex 597 kW 1800 rpm 360 bar 870 lpm 310 bar 20 lpm 5490 mm 2085 mm 2630 mm 2080 liters 700 liters

Power

597 kW

Power

Operating speed

1800 rpm 360 bar 870 lpm 310 bar 20 lpm 6350 mm 2085 mm 2645 mm 2080 liters 815 liters

Operating speed

Maximum motors pressure

Motors flow (no load)

Clamp pressure

Clamp flow

Weight (w/ full fluid & 1/2 fuel)

12065 kg

Weight (w/ full fluid & 1/2 fuel)

10200 kg

Length Width Height

Hydraulic oil capacity

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 92C Vibratory Driver/Extractor Powered By Model 800H * 800T Power Unit

Patented Dual-pull TM suppressor provides maximum vibration isolation during driving and light extraction combined with high pull capability for tough extraction jobs. Optional 5,500 lbs (2494 kg) of bias weight increases pile penetration rates in difficult soils. Full range of clamps available for sheet piling, H-Beams, pipe & cais- sons and timber & concrete piles. Maximum efficiency and reliability ensured by our open-loop hydraulic system. Highest quality, reliable piston pumps and motors. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Adaptable for underwater, low headroom or box leads operation.

ICE Model 385 Sheeting Clamp Clamping Force Clamps & Accessories 385 tons

ICE Model 165 Wood Concrete and Pipe Clamp Clamping Force 165 tons 1470 kN Weight 12,710 lbs 5765 kg

3430 kN

Weight

5850 lbs

2655 kg

ICE 10’ Beam & 2 Model 180 Clamps Clamping Force 392 tons

3488 kN 5370 kg

Weight

11840 lbs

Model 92C Accessories Low-headroom suppressor Wireless Remote Bias weights Vibrator stand Sled for 32” leads

ICE 15’ Beam & 2 Model180 Clamps Clamping Force 392 tons

3488 kN 9960 kg

Weight

27980 lbs

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 128D Vibratory Driver/Extractor Powered By Model 1050 or 1200E Power Unit

Highest driving force (412 tons, 3670 kN) in its class Design combines high eccentric moment and low suspended weight Twin 595HP (444 kW) CAT C15(s) meet current EPA Flexibility engine emission regulations Up to 140 ton (1250 kN) line pull for extraction

ICE Model 128D Vibratory Pile Hammer Eccentric moment

126 kg-m

Maximum frequency

1600 vpm

Driving Force

3685 kN 3560 kN

Centrifugal force

Amplitude (free w/o clamp) Standard line pull for extracting Maximum line pull for extracting Weight (no clamp or hoses)

40 mm

1020 kN 1250 kN 8945 kg 2175 kg 2630 mm 2470 mm 675 mm 445 mm

Non-vibrating Weight Height without clamp (H)

Length (L) Width (W)

Throat width (TW) Hydraulic hose length Hydraulic hose weight

46 m

1090 kg 3800 kg 11820 kg

Height with sheeting clamp (HH) Weight with sheeting clamp & 1/2 hoses Height with beam & caisson clamps Weight with beam, caisson clamps & 1/2 hoses

3955 mm

14860 kg

ICE Model 1050 Power Unit Engine

ICE Model 1200E Power Unit Engine

Caterpillar C27

Caterpillar 2x C15

Emissions rating

EU Stage V

Emissions rating

EU Flex 887 kW 1875 rpm

Power

783 kW

Power

Operating speed

1800 rpm

Operating speed

Maximum motors pressure

380 bar

Maximum motors pressure

380 bar

Motors flow (no load)

1000 lpm

Motors flow (no load)

1000 lpm

Clamp pressure

330 bar

Clamp pressure

310 bar

Clamp flow

20 lpm

Clamp flow

20 lpm

Weight (w/ full fluid & 1/2 fuel)

14740 kg

Weight (w/ full fluid & 1/2 fuel)

14740 kg

Length Width Height

6250 mm 2160 mm 2440 mm 1340 liters 1630 liters

Length Width Height

5700 mm 2135 mm 2900 mm 2080 liters 1625 liters

Hydraulic oil capacity

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 128D Vibratory Driver/Extractor Powered By Model 1050 or 1200E Power Unit

Patented Dual-pull TM suppressor provides maximum vibration isolation dur- ing driving and light extraction combined with high pull capability for tough extraction jobs. Optional 5,500 lbs (2495 kg) of bias weight increases pile penetration rates in difficult soils. Full range of clamps available for sheet piling, H-Beams, pipe & caissons in- cluding quad caisson clamps. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency.

Maximum efficiency and reliability ensured by our open-loop hydraulic system. Highest quality, reliable piston pumps and motors. Environmentally friendly non-toxic, biodegradable hydraulic oil. Adaptable for underwater operation. Heavy steel enclosure and fuel-tank subbase protect power unit .

Clamps & Accessories

ICE Model 385 Sheeting Clamp Clamping Force

ICE 10’ Beam & 2 Model 180 Clamps Clamping Force 392 tons

385 tons

3430 kN

3488 kN 5370 kg

Weight

5850 lbs

2655 kg

Weight

11,840 lbs

ICE 15’ Beam & 2 Model 180 Clamps Clamping Force 392 tons

ICE 7’ Plate & 4 Model 105H Clamps Clamping Force 440 tons

3488 kN 9960 kg

3920 kN 7030 kg

Weight

21,980 lbs

Weight

15,500 lbs

ICE Quad Beam & 4 Model 105H Clamps Clamping Force 440 tons

ICE 9’ Plate & 4 Model 105H Clamps Clamping Force 440 tons

3920 kN

3920 kN 8260 kg

Weight

24,140 lbs

10950 kg

Weight

18,200 lbs

Model 110D Accessories 7’ Plate with 4 Model 145H Clamps Wireless Remote

Bias weights 7’ Quad Plate 12’ Quad beam

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model V360 Hydraulic Vibratory Driver/Extractor Powered By Model 1250G Power Unit Highest driving force (3720 kN) in its class. Twin 444 kW CAT C15 Up to 2000 kN line pull for extraction.

Eccentric moment Maximum frequency Centrifugal force

130 kg-m 1500 vpm

3400 kN

Amplitude (free w/o clamp) Standard line pull for extracting Maximum line pull for extracting Weight (no clamp or hoses)

37 mm

2000 kN 2000 kN 11750 kg 4720 kg

Non-vibrating weight Height without clamp (H)

3785 mm 2425 mm 1070 mm 813 mm

Length (L) Width (W)

Throat width (TW)

Hydraulic hose length Hydraulic hose weight

46 m

1088 kg

Height with sheeting clamp* (HH) 4940 mm Weight with sheeting clamp & 1/2 hoses* 14560 kg Height with beam & caisson clamps* 5040 mm Weight with beam & caisson clamps* 17000 kg

Engine Power

Twin CAT C15

887 kW

Operating speed

1850 rpm 380 bar 1100 lpm 325 bar

Maximum motors pressure

Motors flow (no load)

Clamp pressure

Clamp flow

22 lpm

Weight (w/ full fluid & 1/2 fuel)

14740 kg

Length Width Height

5700 mm 2135 mm 2900 mm 2080 liters 1625 liters

Hydraulic reservoir

Fuel capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model V360 Hydraulic Vibratory Driver/Extractor Powered By Model 1250G Power Unit

Maximum efficiency and reliability are provided by our open-loop hydraulic system and application proven piston pumps and motors. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Full range of clamps available for sheet piling, H-Beams, pipe & caissons in addition to timber & concrete piles.

Adaptable for underwater, low head- room or box leads operation.

Clamps & Accessories

10’ Caisson Beam with Model 142BH Caisson Clamps Clamping force 284 tons, 1526 kN Weight 10,242 lbs, 4546 kg

Other Model V360 Accessories 12’ Quad beam with 100BH Clamps 12’ Quad beam with 142BH Clamps Wireless remote

Model 385 Sheeting Clamp Clamping force 385 tons, 3425 kN Weight 5,400 lbs, 2455 kg

ICE ® Model 158C Vibratory Driver/Extractor Powered By Model 1250E Power Unit

High driving force 4110 kN for maximum production Design combines large eccentric moment (158 kg-m) Up to 1800 kN line pull for extraction

ICE Model 158C Vibratory Pile Hammer Eccentric moment

158 kg-m

Maximum frequency

1500 vpm

Driving Force

4110 kN 3915 kN

Centrifugal force

Amplitude (free w/o clamp) Standard line pull for extracting Maximum line pull for extracting Weight (no clamp or hoses)

21 mm

1800 kN 1800 kN

16500 kg 5000 kg

Non-vibrating Weight Height without clamp (H)

2880 mm 4160 mm 1535 mm 813 mm

Length (L) Width (W)

Throat width (TW) Hydraulic hose length Hydraulic hose weight

45 m

1090 kg

Height with beam & caisson clamps

3740 mm

Weight with beam, caisson clamps & 1/2 hoses

20800 kg

ICE Model 1250E Power Unit Engine

Caterpillar 2x C15

Emissions rating

EU Flex 887 kW 1875 rpm

Power

Operating speed

Maximum motors pressure

380 bar

Motors flow (no load)

1100 lpm

Clamp pressure

325 bar

Clamp flow

22 lpm

Weight (w/ full fluid & 1/2 fuel)

14740 kg

Length Width Height

5700 mm 2135 mm 2900 mm 2080 liters 1625 liters

Hydraulic oil capacity

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 158C Vibratory Driver/Extractor Powered By Model 1250E Power Unit

Patented Dual-pull TM suppressor provides maximum vibration isolation dur- ing driving and light extraction combined with high pull capability for tough extraction jobs. Integral quad caisson clamps for optimizing force transmission. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Maximum efficiency and reliability ensured by our open-loop hydraulic system. Highest quality, reliable piston pumps and motors. Environmentally friendly, non-toxic, biodegradable hydraulic oil. Adaptable for underwater operation. Heavy steel enclosure and fuel-tank subbase protect power unit.

Clamps & Accessories

Four ICE Model 145H Caisson Clamps on 4’ H-Bars Clamping Force 284 tons 2520 kN Weight 10065 lbs 4565 kg Four ICE Model 105H Caisson Clamps on 4’ H-Bars Clamping Force 440 tons 3920 kN Weight 6945 lbs 3150 kg

Pile Diameter Specification Minimum ID

60 in

1525 mm 3640 mm

Maximum OD

143 in

Pile Diameter Specification Minimum ID

40 in

1020 mm 3640 mm

Maximum OD

143 in

Model 158C Accessories Wireless Remote

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974. ©International Construction Equipment, Inc. All rights reserved. January 2020. UV125C_1200E_Jan2013

ICE ® Model 230C Vibratory Driver/Extractor Powered By Model 1600E Power Unit

America’s largest vibratory hammer Highest centrifugal force (5690 kN) of any USA vibratory hammer Design combines large eccentric moment (230 kg-m) & high frequency (1500 vpm) Combined 1600 HP (1194 kW) - Twin CAT C18 - meet current EPA Flexibility engine emission regulations 2250 kN line pull for extraction

ICE ® 200C Vibratory Driver/Extractor Eccentric moment 230 kg-m Maximum frequency 1500 vpm Driving Force 5990 kN Centrifugal force 5690 kN Amplitude (free w/o clamp) 20 mm Standard line pull for extracting 2250 kN Maximum line pull for extracting 2250 kN Cassion Clamps 4x180 Weight (no clamp or hoses) 35200 kg Non-vibrating Weight 10990 kg Height without clamp (H) 3280 mm Length (L) 5800 mm Width (W) 1855 mm Throat width (TW) 1375 mm Hydraulic hose length 45 m Hydraulic hose weight 1410 kg Height with beam & caisson clamps 4280 mm Weight w/ 80”H, caisson clamps & 1/2 hoses 40550 kg

ICE ® 1600E Power Unit Engine

Twin CAT C18

Emissions rating

EU Flex 1194 kW 1850 rpm

Power

Operating speed

Maximum motors pressure

380 bar

Motors flow (no load)

1450 lpm

Clamp pressure

310 bar

Clamp flow

20 lpm

Weight (w/ full fluid & 1/2 fuel)

20800 kg 10060 mm 2035 mm 2640 mm

Length Width Height

Hydraulic oil capacity

3785 liters 2650 liters

Fuel Capacity

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

ICE ® Model 230C Vibratory Driver/Extractor Powered By Model 1600E Power Unit

Patented Dual-pull™ suppressor provides maximum vibration isolation during driving and light extraction combined with high pull capability for tough extrac- tion jobs. Integral quad caisson clamps for optimizing force transmission. Remote-control pendant for vibrator and clamp with emergency stop. Engine speed control for fuel efficiency. Maximum efficiency & reliability ensured by our open-loop hy - draulic system. Highest quality, reliable piston pumps and motors. Adaptable for underwater, tandem and multiple operation. Environmentally friendly, non-toxic, biodegradable hydraulic oil.

Pile Diameter Specification Minimum ID

Four ICE Model 145W Caisson Clamps on 4 - 33” H-Bars Clamping Force 1568 tons 5040 kN Weight 11,160 lbs 3704 kg Four ICE Model 180 Caisson Clamps on 4 - 80” H-Bars Clamping Force 784 tons 6976 kN Weight 13,840 lbs 6272 kg

38.25 in

970 mm 1727 mm

Maximum OD

68 in

Pile Diameter Specification Minimum ID

80 in

2030 mm 4370 mm

Maximum OD

172 in

Designed and manufactured in USA by ICE ® World leader in cost-effective foundation equipment since 1974.

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25

Made with FlippingBook Online newsletter